Tag: university / projects: 6 / blogs: 3

Recent Projects

Model Rocket Flight Computer

May 16, 2023

As part of IC SpaceSoc, we designed a PCB flight computer using an STM32 microcontroller, environment sensor, inertial measurement unit, GPS, buzzer and radio. The PCB was assembled using a stencil and reflow oven.

PCB STM32 electronics university

DSP Voice Synthesizer

May 15, 2023

As part of the 3rd year Real-Time Digital Signal Processing module, we created a voice synthesizer that could synthesize a message using Linear Predictive Coding (LPC). The hardware used was the TI D2837D LaunchPad and BOOSTXL_AUDIO boards.

DSP electronics university

FPGA Function Accelerator

May 15, 2023

As part of the 3rd Year Digital Systems Design module, we created a function accelerator using an Altera Cyclone V FPGA. This system was built around the NIOS II embedded processor with custom instructions to a hardware block that implemented floating point operations and the CORDIC algorithm.

FPGA electronics university

Impedance Measurement Meter

May 15, 2023

As part of the 3rd year Instrumentation module, we created a complex impedance meter designed to measure devices with impedance of 10 to 1MOhm using stimulus frequency of 1 to 100kHz. The digital part of the device was based on the STM32 and the analog frontend was a custom PCB shield.

PCB STM32 electronics university

Autonomous Mars Rover

December 21, 2022

Autonomous mars rover with camera for obstacle detection, path finding, radar, PD control, remote telemetry and solar charging.

electronics university

Analog Music Synthesizer Simulation

September 11, 2021

Analog synthesizer built and simulated in LTSpice for our first year project. This design features a low frequency oscillator, voltage controlled filter and amplifier.

electronics university